• Remove SIM lock and SP lock
• Re-set user lock

• Support following phones

Before you start, Insert 4 x AA battery in to the clip connect the usb cable to clip, choose the connector for the correct phone

Menu map:

ERICSSON -

                    Auto detect

                    RSA ( K700i K500i S700 T630rsa T610rsa )

                    Non RSA ( t610 t68 t28)

                    T66 T600 CODE

                    READ CODE - T68 , P800 T39 T300 AND OLD MODEL

                   - T610 READ CODE ( OLD VERSION )-NCK CODE

- RETURN

NOKIA -

                     DCT3 UNLOCK

                    - DCT3 FACTORY RESET

                    - DCT4 UNLOCK

                    - DCT4 FACTOERY RESET

SHARP -         GX20 GX10i GX10 GX1 UNLOCK ( DIRECT UNLOCK )

SHARP           GX30-

PANASONIC-   GD67 GD87 ( CODE READ)

                    - GD68 GD88 ( CODE READ)

                    - X60

XDA -

SPV -

SENDO         - s300 M550

LG(3G) -          U8110

Samsung -       E700 E800 E810 V200  A800

VK                  207i ( 530)

Setting -sound level

-return

DCT4-3100 3200 3510i 3650 5100 6x00 6110 6310i 6510 72x0 7610 7650 8310 8910i New Type-6 6230

To unlock Nokia phones by DIRECT UNLOCKING

2 Press select to nokia Menu.

3 Nokia , then press ENTER, then select to choose

4 DCT4 or dct security code

5 Connect Platinum to the Nokia phone via the PS2 connector provide (Connectors for Nokia phones are not supplied)

6 Power on the phone and press enter

phone will display TEST during unlocking

To unlock Sony Ericsson phones by DIRECT UNLOCK

1 Press Select to ERICSSON Menu.

AUTO DETECT  then press enter,

2 Connect Platinum to the Ericsson phone via the PS2 connector and the Sony Ericsson connector provided.

3 press ENTER when ready, a blue LED will flash, then press enter again ( led will stop blink) if correct two or more led

will display on clip)

To unlock Sony Ericsson phones by DIRECT CODE READER

1 Press Select to ERICSSON Menu.

Ericsson, then press enter, then select to choose model

2 Connect Platinum to the Ericsson phone via the PS2 connector and the Sony Ericsson connector provided.

3 press ENTER when ready, a blue LED will flash, then press enter again ( led will stop blink) if correct two or more led

will display on clip)

when hear NCK code, press select for more codes

4 Power the phone on, then by pressing < ** < on the handset to access the unlock menu to input the desire code to unlock the phone.

5 If there is more then 1 lock on the phone, ( Padlock closed ), repeat step 4 and enter code.

6 If the USER code is anything other than 0000 or DEFAULT, a simcard has to be inserted to phone to deactivate USER code first before unlocking codes can be entered.

7 You can then reset USER code to 0000 afterwards.

To unlock Panasonic GD67 87 88 phones

1, phone off, connect cable to phone, press enter

2.Phone will display TEST MODE

3. write down the code

How to enter the code

1 Power on phone with NO simcard and type 746 from keypad and press joystick navigator button TWICE to enter into unlock menu.

2 Scroll down menu and select the HIGHLIGHTED options, eg: NETWORK, ORANGE or SERVICE PROVIDER.

3 Enter codes accordingly and press UNLOCK, repeat if there is more than one unlock code.

4 Test with simcard, USER code will be reset to 0000.

To unlock Panasonic X60 (USE T191 CABLE (HEADPHONE CABLE) )

1. To unlock the phone, put the phone into test mode first

2. To put the phone into test mode push the power button, the # and * key together for 3 seconds.

3. Connect the phone to the clip.

4. Press Enter on the clip and the clip will say ok.

5. Disconnect the phone from the clip and put it any sim card.

6. Power on the phone and wait for the phone to pickup network.

7. Type 52824** and go to NETWORK then choose enter code

8. Type 00000000 and press enter.

9. Your Phone Is Now Unlocked!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

To unlock Sharp GX1 GX10 GX10-i GX20 phones.

1 Connect PS2 cable to Sharp cable provided for CLIP to phone.

2 Phone state is ON.

3 Select Sharp from menu and press OK.

4 The phone will enter Test mode and count down from 3 seconds will display on phone.

5 Phone will turn off, phone now is unlocked, user code is reset to 0000.

To Unlock the GX30 t100

1 Make sure the phone is fully powered on with and full battery.

2 Connect the clip to the phone, and press enter.

3 When you see XXXX on the display of the phone, remove the clip from the phone

4 Press 1 on the phone (The phone will enter manual diag mode)

5 Press 99 on the phone and then press the top right button (揝elect init area?should now be displayed on the phone)

6 Press 3 on the phone for simlock or 1 on the phone for user lock and then press the top right button

That抯 all the phone is now unlocked

To unlock LG u8110 u8120

1 Connect PS2 cable to LG cable provided for CLIP to phone.

2 Phone state is OFF

3 Select LG from menu and press OK.

4 Power on the phone when ask to.

5 Clip will confirm when the phone is unlocked.

To unlock Samsung E800 E700 Vxxx Sxxx Nxxx

1 Connect PS2 cable to Samung cable provided for CLIP to phone.

2 Phone state is OFF ( E810 phone is on)

3 Select Samsung from menu and press OK.

4 Power on the phone when ask to.

5 Clip will confirm when the phone is unlocked.

To unlock Sendo s300 m550

1 Connect PS2 cable to Sendo cable provided for CLIP to phone.

2 Phone state is OFF

3 Select Sendo from menu and press OK.

4 Power on the phone when ask to.

5 Clip will confirm when the phone is unlocked.  ( please check phone battery connector after unlock)

To unlock SPV and SPV E100 phone

1 Put SPV in test mode by holding both vol key then power on the phone ( 3 colour band will display on phone)

2 Connect the ( option ) SPV / XDA cable to phone and connect the 9v battery to cable

3 choose the SPV menu on data1 then press unlock

4 Screen on the SPV will turn white, after a few more sec, unlocked will display.

To unlock XPV phone

1 Put XDA in test mode by holding the RESET then power on the phone ( 3 colour band will display on phone)

2 Connect the ( option ) SPV / XDA cable to phone and connect the 9v battery to cable

3 choose the XDA menu on data1 then press unlock

4 Screen on the XDA will turn white, after a few more sec, unlock sucessful will display.

To unlock VK 207i  VK530

1 Connect PS2 cable to VK cable provided for CLIP to phone.

2 Phone state is ON

3 Select VK207 from menu and press OK.

4 Clip will confirm when the phone is unlocked.

• Product Performance and quality
• Prompt Delivery and Service
• Experienced Technical Staff
• OEM Capability
• Price

• Worldwide

• Payment Terms: TT

• Lead-time: 3 - 5 days